【US】4 Axis PLC CNC Motion Controller Offline Stand Alone Control DDCS-EXPERT+MPG

$398.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store powace08
() %,

Location: New York
Ships to: US,
Item: 274963792957

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
MPN:Does Not Apply
RATTM MOTOR:RATTM MOTOR

【US】4 Axis PLC CNC Motion Controller Offline Stand Alone Control DDCS-EXPERT+MPG Ship From our USA warehouse Two options: Parcel include:1). If you choose «4 Axis Controller»:1 x 4 Axis CNC Offline stand alone Controller DDCS-EXPERT1 x 4GB USB Flash drive1 x USB Extension CableEnglish User manual 2). If you choose «4 Axis Controller with MPG»:Parcel include:1 x 4 Axis CNC Offline stand alone Controller DDCS-EXPERT1 x 4GB USB Flash drive1 x USB Extension Cable1 x 4 Axis 100 Pulse Pendant Handwheel MPG with Emergency Stop with plugEnglish User manual Descriptions:4 Axis PLC Controller off-line (DDCS expert) ♞【Product】Model Number:DDCS EXPERT ; 1M Hz output frequency for each axis; 7 inch full color display screen; resolution ratio: 1024*600, 40 operation keys♞【Introduction】The DDCS Expert numerical control system adopts the ARM+FPGA design framework. ARM controls the human-computer interface and code analysis and the FPGA provides the underlying algorithms and creates the control pulse. This guarantees reliable control and easy operation.The internal operating system is Linux based.♞【Compatible G Code】Compatible with standard G-code,support popular CAD/CAM software, such as ArtCam, MasterCam, ProE, JDSoft SurfMill, Aspire, Fusion 360 and so on;♞【Power Supply】The Power Supply for the controller is 24VDC, minimum Current is 0.5A♞【Applications】The DDCS Expert can be used for many styles and types of CNC machines. Lathes, CNC Routers,Pick&Place and Milling Machine, lathe and cutters are just a few examples. DDCS-Expert Brief technical feature:IntroductionThe DDCS Expert is a motion controller for open or close stepper and servo systems with 7/10.2 full color display screen. The highest output pulse per axis is 1MHz. The users can self-define the functional keys. This controller supports multiple spindle mode, support straight Tool Magazine, gantry type Magazine, disk type magazine. The Operation system interface even though very comprehensive, can be learned in very short time.The DDCS Expert numerical control system adopts the ARM+FPGA design framework. ARM controls the human-computer interface and code analysis and the FPGA provides the underlying algorithms and creates the control pulse. This guarantees reliable control and easy operation.The internal operating system is Linux based.The DDCS Expert can be used for many styles and types of CNC machines. Lathes, Routers, Pick&Place and Mills, lathe and cutters are just a few examples. The DDCS Expert operates as a Stand Alone system without the need of a computer. This guarantees high precision, accuracy and reliability. Feature: 1) Max. 5 Axis; 1M Hz output frequency for each axis; 2-4 Axis linear interpolation, any 2 axis circular interpolation; 2) 7 inch full color display screen; resolution ratio: 1024*600, 40 operation keys; 3) 24 photoelectric isolated digital inputs, 21 photoelectric isolated digital outputs; 4) Analog spindle control 0-10V spindle control, also support PWM Output; 5) Magazine type: Supports multiple spindle mode, support straight Tool Magazine, gantry type Magazine, disk type magazine; 6) Probe Mode: Supprt Floating Probe and Fixed Probe; 7) Backlash compensation methods: direction gap compensation, radius gap compensation, length compensation; 8) Interpolation Algorithm: S type, circular hard algorithem, circular soft algorithm; 9) Language: Chinese, English; 10) Software Alarms: Program Error, operation Error, overtravel Error, Driver Error and so on; 11) Network: Support file share and online machining the remote files by Ethernet; 12) Spindle control mode support Multi-speed (3 lines 8 kinds speed), 0-10V Analog output, and servo spindle output; 13) Compatible with standard G-code, support popular CAD/CAM software, such as ArtCam, MasterCam, ProE, JDSoft SurfMill, Aspire, Fusion 360 and so on; 14) The control system can preview the processing path before machining, and it makes the system more steady, working smoothy and precise; 15) Support high speed machining in continuous Polyline segment, system can choose a most efficient algorithm automatically from different kinds Polyline segment algorithm; 16) Support un-limited size file for machining; 17) Support Pause Breakpoint resume, “Power Cut” recovery, Start from the specific line; 18) Support time-lock function; 19) Support 4 kinds operation rights: visitor, operator, admin,super admin; 20) Support function of “Try cutting” (handwheel guiding) and “Single-stage processing mode” and so on; 21) Support the fuction of Back to orignal point 21) The Power Supply for the controller is 24VDC, minimum Current is 0.5A;The DDCS-Expert is a small box that can fit in a window of a small control box or control cabinet. Four locking hooks fix this controller from the frame. The dimension you find in above figure.The front panel is 268mm*172.5mm*5.2mm;The main body is 268mm*172.5mm*70mm;To mount the unit in an equipment cabinet,cut the hole 258.4mm*109mmThe front panel consists of 40 user keys and the 7 inch (1024*600) LCD Stepper /Servo Driver Wiring The stepper / servo control output, the Pulse and Direction signal output voltage is ± 5V DDCSE Input and Output are the user-defined IO ports, In our example, we already set IN24 as the “ 5th axis servo alarm signal ” input port.Limit, Home and Probe Inputs DDCSE Input and Output are the user-defined IO ports, In our example, we already set IN12, IN11 and IN10 as the “ axis limit signal ” Input port, and we already set the IN09 as “ Probe ” output port. Please note that the limit switch type should be NPN Normal Open, and the voltage range is 24VDC.External Buttons DDCSE Input and Output are the user-defined IO ports, In our example, we already set IN23 as the “ External Start ” input port, IN22 as the “ External Pause ” input port, and IN21 as “ Extertnal Stop ” input Port. please choose the external buttons which is 24VD power supply input,then no need an external power supply for them.Needs two power suppliesDDCS-Expert needs two power supplies,Main power is for controller system,IO Port power is for Input and Output and MPG ports. Both power supply is 24VDC,current is 3A.In the System Power input port ,the marked 24V and GND is the main power input ports;In the IO power input ports,the COM+ and COM- is the power input ports for Input/Output Port and MPG.Please keep in mind,only when the two power supplies are connected correctly the controller can be work properly.Many new users only give system power,then the limited switches,the relay,and MPG and spindle don’t work at all,then please go to check if you also give power to IO ports.IO power gives the power to all the IO ports,include the Limited switch,Relay,MPG,Etop and all other Input and output Ports,without it,spindle,MPG,Input and Output ports cannot work.In order to avoid electrical noise it is highly recommended to use two separate 24V power supplies.In order to avoid high-frequency electrical noise from power supply cable,it is highly recommended to intall a noise filter at the power input to the switch power supply.Wiring diagramDDCS-Expert wiring board, there are about 7 parts as following:1) System Power and IO Power supply input Ports;2) Driver Signal output Ports;3) Input and Output Ports;4) Spindle Output Ports;5) MPG Port;6) Ethernet and USB interface;7) HMI/RS232 interface. Functional/Performance comparison between DDCS Expert and DDCSV3.1: 2. Pendant Handwheel MPG with Emergency stop Description:1.The CNC 4 Axis handheld controller MPG Pendant with x1, x10, x100 selectable, You are bidding one complete unit of the MPG pendant with Emergency stop for 4 axis CNC machine, it equipped with our popular machined MPG unit with 4 axis and scale selector, LED indicator also send feedback from the CNC machine to user about the status of the unit. 2.All Wiring isolated from MPG unit and provide a easy to install wiring diagram, it suit both commercial machine as a replacement jog control unit or other computer based controller. Which add great control flexibility to the system. Specification:1. x1, x10, x100 switch2. X,Y,Z,4th axis selector switch 3. LED indicator4. With Emergency stop5. High quality professional chassis6. 6ft extendable high quality shielded cable cord7. Magnetic base holder can place anywhere on the machine steel surface8. Required 5V+, 150mA, power for MPG9. Phase output is A ,/A and B,/B;10. TTL output, drive capability +-20mA;11. Support CNC system:Taiwan Pou Yuen M600 M500 M520i T300 series, Higerman, HANUC,GSK,opened NC, KND,Siemens, the NUM, Spain FAGOR (NEW, 8055I) and so on.12.Wiring:User can wire this unit to the CNC system with easy. Description:1) CNC system and position control of various mechanical devices, mainly for CNC machine tools and various mechanical zero correction and signal division.2) 100 times per revolution slightly cracking point,100 pulses per revolution output, holding the handle of the panel and all-metal high-grade design.3) Metal code disc, high precision, good texture4) Easy installation, shaped thin, ultra-light.5) DC 5V power system6) Voltage, single-ended, differential in three output options provide 100PPR pulse output options.7) Driver output type, anti-interference ability, long-distance transmission.8) Oil, water, dust-proof design (grade IP65) spiral stretch 20 million guaranteed. Features:1) Novelty, easy to move, interference, load capacity.2) Full plastic shell, insulation, high strength, anti-oil seal design.3) With × 1, × 10, × 100 third gear ratio, enabling 4-12 axis magnification switch4) With the control switch, emergency stop switch optional, easy to operate5) For CNC machine tools, printing machinery, numerical control equipment Specification:Resolution100PPRSupply VoltageDC5V +/-5%Supply Current≤80mAOutput Voltage≥2.5V≤0.4VOutput Current<40mAFall/Rise time≤5ns(typ)SwitchX1,X10,X100Axis SwitchOFF,X,Y,Z,4Response Frequency0-10KHzWeight560g 3. M3K extended keyboard Shipping Please open the package and check if there are some damages before sign, if there are some damages , please do not sign and contact us immediately Items will be shipped within 1-2 days upon the receipt of payment. Payment We accept paypal payment, all Paypal must be confirmed(shipping and billing address must match and correct and it need tell us your telephone no for delivery) Problem&Feedback Please give us the opportunity to resolve any problem when you have, we concern your problem and we will try our best to resolve it. We are a new member in ebay now, and need understand both of sides Pls email us before you want to leave any negative feedback Refund When you have the parcel, and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping cost Contact us Welcome worldwide customer inquire and questions, we will try to do our best to feedback customer’s email within 1-2 business days,if not pls check the mail box again Customer’s satisfaction is very important to us.

Frequently Asked Questions About 【US】4 Axis PLC CNC Motion Controller Offline Stand Alone Control DDCS-EXPERT+MPG in My Website

solucionesencloud.com is the best online shopping platform where you can buy 【US】4 Axis PLC CNC Motion Controller Offline Stand Alone Control DDCS-EXPERT+MPG from renowned brand(s). solucionesencloud.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 【US】4 Axis PLC CNC Motion Controller Offline Stand Alone Control DDCS-EXPERT+MPG on solucionesencloud.com?

Frequently Asked Questions About 【US】4 Axis PLC CNC Motion Controller Offline Stand Alone Control DDCS-EXPERT+MPG in My Website

What are the best-selling 【US】4 Axis PLC CNC Motion Controller Offline Stand Alone Control DDCS-EXPERT+MPG on solucionesencloud.com?

Add a comment Cancelar la respuesta

Soluciones en Cloud

台灣找工作平台