『US』4 AXIS CNC DDCS Expert Controller Offline Standalone PLC Control System+MPG

$540.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store kuku218
(1627) 99.5%,

Location: New York
Ships to: US,
Item: 196456948416

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
RATTM MOTOR:RATTM MOTOR
keys:40 operation keys
DDCS EXPERT:DDCS EXPERT
MPN:Does Not Apply
Country/Region of Manufacture:China
Resolution ratio:1024*600
Support axis:5 Axis

『US』4 AXIS CNC DDCS Expert Controller Offline Standalone PLC Control System+MPG 【USA Stock & Fast shipping】Ship from USA Warehouse fast shipping service to US Customers Parcel include:1 x 4 Axis CNC Offline motion controller DDCS-EXPERT1 x 4 Axis Pendant Handwheel MPG with E-Stop with 15-pin plug1 x 4GB USB Flash drive1 x M3K extended keyboard1x matching cable1 x USB extension cable1x 4GB USB flash drive1 x network cable2 x 75W 24V DC power supplyEnglish User manual Product descriptions: 4 Axis Offline controller DDCS EXPERTProduct Description4 AXIS DDCS-EXPERT Offline Standalone Motion Controller IntroductionThe DDCS Expert is a 4 axis motion controller for open or close stepper and servo systems with 7 inch LCD full color display screen. The highest output pulse per axis is 1MHz.The users can self-define the functional keys. This controller supports multiple spindle mode, support straight Tool Magazine, gantry type Magazine, disk type magazine. The Operation system interface even though very comprehensive, can be learned in very short time.The DDCS Expert numerical control system adopts the ARM+FPGA design framework. ARM controls the human-computer interface and code analysis and the FPGA provides the underlying algorithms and creates the control pulse. Reliable control and easy operation.The internal operating system is Linux based.The DDCS Expert can be used for many styles and types of CNC machines. Lathes, Routers, Pick&Place and Mills, lathe and cutters are just a few examples. The DDCS Expert operates as a Stand Alone system without the need of a computer.DDCS-Expert Brief technical feature:Features1) Max. 5 Axis,if you choose 4-Axis version,then only supports 4 Axis;1MHz output frequency for each axis;2-4 Axis linear interpolation,any 2 axis circular interpolation;2) 7 inch full color display screen; resolution ratio: 1024*600, 40 operation keys;3) 24 photoelectric isolated digital inputs, 21 photoelectric isolated digital outputs;4) Analog spindle control 0-10V spindle control, also support PWM Output;5) Magazine type: Supports multiple spindle mode, support straight Tool Magazine, gantry type Magazine, disk type magazine;6) Probe Mode: Supprt Floating Probe and Fixed Probe;7) Backlash compensation methods: direction gap compensation, radius gap compensation, length compensation;8) Interpolation Algorithm: S type, circular hard algorithem, circular soft algorithm;9) Language: Chinese, English;10) Software Alarms: Program Error, operation Error, overtravel Error, Driver Error and so on;11) Network: Support file share and online machining the remote files by Ethernet;12) Spindle control mode support Multi-speed (3 lines 8 kinds speed), 0-10V Analog output, and servo spindle output;13) Compatible with standard G-code, support popular CAD/CAM software, such as ArtCam, MasterCam, ProE, JDSoft SurfMill, Aspire, Fusion 360 and so on;14) The control system can preview the processing path before machining, and it makes the system more steady, working smoothy and precise;15) Support high speed machining in continuous Polyline segment, system can choose a most efficient algorithm automatically from different kinds Polyline segment algorithm;Functional/Performance comparison between DDCS-Expert and DDCSV3.1More features16) Support un-limited size file for machining;17) Support Pause Breakpoint resume, “Power Cut” recovery, Start from the specific line;18) Support time-lock function;19) Support 4 kinds operation rights: visitor, operator, admin,super admin;20) Support function of “Try cutting” (handwheel guiding) and “Single-stage processing mode” and so on;21) Support the fuction of Back to orignal point21) The Power Supply for the controller is 24VDC, minimum Current is 0.5A;22) It can support mm and inch. The default is mm. If you need to set inch as the unit, please set it to imperial units through G20 code.23) If you want to use slave function,you can connect the X-axis or Y-axis to the A-axis,and then the X-axis or Y-axis can slave the A-axis.SizeThe DDCS-Expert is a small box that can fit in a window of a small control box or control cabinet.Four locking hooks fix this controller from the frame. The dimension you find in above figure.The front panel is 268mm*172.5mm*5.2mm;The main body is 268mm*172.5mm*70mm;To mount the unit in an equipment cabinet,cut the hole 258.4mm*109mmThe front panel consists of 40 user keys and the 7 inch (1024*600) LCDNeeds two power suppliesDDCS-Expert needs two power supplies,Main power is for controller system,IO Port power is for Input and Output and MPG ports. Both power supply is 24VDC,current is 3A.In the System Power input port ,the marked 24V and GND is the main power input ports;In the IO power input ports,the COM+ and COM- is the power input ports for Input/Output Port and MPG.Please keep in mind,only when the two power supplies are connected correctly the controller can be work properly.Many new users only give system power,then the limited switches,the relay,and MPG and spindle don’t work at all,then please go to check if you also give power to IO ports.IO power gives the power to all the IO ports,include the Limited switch,Relay,MPG,Etop and all other Input and output Ports,without it,spindle,MPG,Input and Output ports cannot work.In order to avoid electrical noise it is highly recommended to use two separate 24V power supplies.It is highly recommended to intall a noise filter.Probe wiringWe already set the IN09 as “ Probe ” output port.Some users asked for the wiring methods for the probe with over-strock alarm,here we also set one sample for it.In the example, we go to the IO port to sent the IN07 as the “Probe signal”,IN06 as “Negative Z-axis hard limit signal”.Stepper /Servo Driver WiringThe stepper / servo control output, the Pulse and Direction signal output voltage is ± 5VDDCSE Input and Output are the user-defined IO ports, In our example, we already set IN24 as the “ 5th axis servo alarm signal ” input port.XP+: Pulse Signal Positive Output of the X Axis (5V)XP-: Pulse Signal Negative Output of the X Axis (5V)XD+: Direction Signal Positive Output of the X Axis (5V)XD-: Direction Signal Negative Output of the X Axis (5V)Limit switch, Home switch and Probe InputsDDCSE Input and Output are the user-defined IO ports, In our example, we already set IN12, IN11 and IN10 as the “ axis limit signal ” Input port, and we already set the IN09 as “ Probe ” output port.Please note that the limit switch type should be NPN Normal Open, and the voltage range is 24VDC.External ButtonsDDCSE Input and Output are the user-defined IO ports, In our example, we already set IN23 as the “ External Start ” input port, IN22 as the “ External Pause ” input port, and IN21 as “ Extertnal Stop ” input Port.please choose the external buttons which is 24VD power supply input,then no need an external power supply for them.Relay WiringBy Configuration of more Spindle Output ports, the spindle control output terminal offers connections for Start / Stop of Cooling ( M8 / M9 ) and Start / Stop of Lubrication ( M10 / M11 ) and so on.For example, it can be used for a Relay output port. Following figure shows the wiring methods.If Relay Power Supply is 24VDC:DDCS Expert Input and Output are the user-defined IO ports,as our example here,we already set OUT10 as the “Cooling on/off” output port,and we already set the OUT01 as Vacuum valve on/off” output port.If Relay Power Supply is not 24VDC:The users need to use an external power supply,then we will provide the Schemat-ics drawing.The Wiring for the Multi-Speed SpindleFOR:Spindle Start/Stop-Forw ard Rotation and Stop Output of spindle(OUT21)COM-: Spindle Output COMMON(Cannot short connect with ACM)VSO: Analog OutputACM: Analog Ground(Connect with Anaog input port of the inverter)There are 3 parameters related to the Multi-speed spindle:#079-“Spindle interface type”;Here we need to set it to “ Multi-speed ”#088 — “Multi-speed section counts”; The section count value range is 2-8, the users can set 2-8 different spindle speed.#082 — “Max.Spindle Speed”.The the wiring for the Multi-Speed Spindle as above wiring.Spindle WiringIn the Param Page, by #079, we can define the spindle mode.In Analog Spindle, the speed controlling output terminal can output 0-10V. It can adjust the speed of the spindle by sending the voltage between 0 and 10V to the VFD according the the Spindle Speed Setting.Controlling the speed of a spindle with a VFD only needs the Start/Stop signal and the 0-10V signal to control the frequency.FOR port is same wiring methods as the normal Output Ports.FOR is for spindle forward rotation output or start/stop output;Analog circuit is isolated with Power supply output,Never short connect the ACM and COM- ( DCM );If only need the Start and Stop command for the spindle, then just connect FOR output port of the controller with Start input port of the VFD.The «VSO» and «PWM» only one port is avaiable for one configuration. Use «VSO» port or «PWM» port, the two ports cannot be used at the same time.2.Pendant Handwheel MPG with Emergency stopDescription:1.The CNC 4 Axis handheld controller MPG Pendant with x1, x10, x100selectable, You are bidding one complete unit of the MPG pendant withEmergency stop for 4 axis CNC machine, it equipped with our popular machined MPG unit with 4 axis and scale selector, LED indicator also send feedback from the CNC machine to user about the status of the unit.2. All Wiring isolated from MPG unit and provide a easy to install wiringdiagram, it suit both commercial machine as a replacement jog controlunit or other computer based controller. Which add great controlflexibility to the system.Specification:1. x1, x10, x100 switch2. X,Y,Z,4th axis selector switch 3. LED indicator4. With Emergency stop5. High quality professional chassis6. 6ft extendable high quality shielded cable cord7. Magnetic base holder can place anywhere on the machine steel surface8. Required 5V+, 150mA, power for MPG9. Phase output is A ,/A and B,/B;10. TTL output, drive capability +-20mA;11. Support CNC system:Taiwan Pou Yuen M600 M500 M520i T300 series,Higerman, HANUC,GSK,opened NC, KND,Siemens, the NUM, Spain FAGOR (NEW,8055I) and so on.12.Wiring:User can wire this unit to the CNC system with easy.Description:1) CNC system and position control of various mechanical devices, mainly forCNC machine tools and various mechanical zero correction and signaldivision.2) 100 times per revolution slightly cracking point,100 pulses per revolution output, holding the handle of the panel and all-metal high-grade design.3) Metal code disc, high precision, good texture4) Easy installation, shaped thin, ultra-light.5) DC 5V power system6) Voltage, single-ended, differential in three output options provide 100PPR pulse output options.7) Driver output type, anti-interference ability, long-distance transmission.8) Oil, water, dust-proof design (grade IP65) spiral stretch 20 million guaranteed.Features:1) Novelty, easy to move, interference, load capacity.2) Full plastic shell, insulation, high strength, anti-oil seal design.3) With × 1, × 10, × 100 third gear ratio, enabling 4-12 axis magnification switch4) With the control switch, emergency stop switch optional, easy to operate5) For CNC machine tools, printing machinery, numerical control equipmentSpecification:Resolution100PPRSupply VoltageDC5V +/-5%Supply Current≤80mAOutput Voltage≥2.5V≤0.4VOutput Current<40mAFall/Rise time≤5ns(typ)SwitchX1,X10,X100Axis SwitchOFF,X,Y,Z,4Response Frequency0-10KHzWeight560g3. M3K extended keyboard2 x 75W 24V DC power supplies 75W 24V DC Switching Power Supply SpecificationsOutput voltage: 24VDCRated Current: 3.2ARated Power: 76.8WVoltage accuracy: ±1.0%Line regulation rate: ±0.5%Load regulation rate: ±0.5%Working current: 1.4A/115V;0.85A/230VEfficiency: 90%AC input 115V/230V AC selected by switch; Input voltage: 100-240V AC; Output voltage: 24V; The built-in potentiometer can adjust the output voltage by ± 10%. Problem&Feedback Please give us the opportunityto resolve any problem when you have,we concern your problem and we will try our best to resolve it. Pls contact us before you want to leave any negative feedback. Refund Any reason required for all refund. Item must be in it's original condition and no physical damage,buyer responsible for all shipping cost. When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos.

Frequently Asked Questions About 『US』4 AXIS CNC DDCS Expert Controller Offline Standalone PLC Control System+MPG in My Website

solucionesencloud.com is the best online shopping platform where you can buy 『US』4 AXIS CNC DDCS Expert Controller Offline Standalone PLC Control System+MPG from renowned brand(s). solucionesencloud.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 『US』4 AXIS CNC DDCS Expert Controller Offline Standalone PLC Control System+MPG on solucionesencloud.com?

Frequently Asked Questions About 『US』4 AXIS CNC DDCS Expert Controller Offline Standalone PLC Control System+MPG in My Website

What are the best-selling 『US』4 AXIS CNC DDCS Expert Controller Offline Standalone PLC Control System+MPG on solucionesencloud.com?

Add a comment Cancelar la respuesta

Soluciones en Cloud

台灣找工作平台