Also available in many other custom anodized colors.  Just contact me if interested.

FREE WORLDWIDE SHIPPING IS INCLUDED!!!

Up for sale is a 22 piece set of…

Custom BRASS (satin) Anodized Titanium Parts
Set to fit Benchmade Osborne 940-1 Series Knives.

Upgrade the Original Steel Parts to Lighter Custom Rust Proof BRASS Anodized Titanium Versions.

This Custom Titanium 22 Piece Parts Set is a direct replacement for the
Benchmade Osborne 940-1 Series knives.

This set won’t fit the Aluminium Scaled flat backspacer version of the 940 & 943 Osborne knives.
I can do a custom 940 or 943 set if wanting it for those versions. Please contact me for details.

This 22pc parts set will also fit aftermarket customized scales as long
as the aftermarket scales can use the original stock sized 940-1 parts
and the original sized round standoffs.

These custom parts are not designed to fit Cloned or Fake Benchmade knives.
Do not buy these parts for any cloned or fake knives as they probably won’t fit.

Please note: No knives pictured or mentioned are for sale.

What is included in this sale is the FULL 22 piece set of BRASS
Titanium Parts to fit the original Benchmade 940-1 Series knives.

This 22pc Full Set includes the following custom titanium parts:

2 x Custom    BRASS Anodized Titanium Custom T6 Thumb Studs (1 set)
1 x Custom    BRASS Anodized Titanium Axis Lock Bar
1 x Custom    BRASS Anodized Titanium Pivot Nut
1 x T10 Torx  BRASS Anodized Titanium Pivot Screw
4 x T6   Torx  BRASS Anodized Titanium Scale Screws (shortest size)
4 x T6   Torx  BRASS Anodized Titanium Standoffs Screws (middle size)
3 x T6   Torx  BRASS Anodized Titanium Pocket Clip Hole Protector Screws (middle size)
3 x T6   Torx  BRASS Anodized Titanium Pocket Clip Screws (longest size)
1 x Custom    BRASS Anodized Titanium Blade Stop Pin 
2 x Custom    BRASS Anodized Titanium Standoffs

 

Other Possible Custom Anodizing Colors:

Other Custom colors can be requested.
As I can do this set in about 20 other anodized colors.
Please check my other listings for more options or contact me directly if you don’t see it.
Other Colors Such As: purple, yellow, maroon, copper, natural raw titanium, light blue, brass,
dark blue, bronze, green, teal, gold, ice blue, pink, blue-green, magenta, yellow-green etc.
(please note some colors cost more than other colors)

Installation Notes:

To install this 22pc Set, good quality Torx T6 and T10 tools will be needed. (Such as Wiha Torx tools)
Please note: A bit of non-permanent thread locking glue, plumbers tape or even a drop of nail polish
is recommended on the screw’s thread. Just incase it comes off over time.

 

INSTALLATION WARNING:

BE PREPARED TO TAKE YOUR WHOLE KNIFE APART IN ORDER TO INSTALL THESE PARTS.

THE AXIS LOCKING SYSTEM IS QUITE FIDDLY TO TAKE APART AND RE-INSTALL.

THERE ARE 2 WIRE SPRINGS HOLDING IT ALL TOGETHER. SO BE CAREFUL NOT TO LOSE
THESE SPRINGS AS THEY ARE VITAL FOR A FUNCTIONING AXIS LOCK.

THE AXIS LOCK BAR COMES ALREADY POLISHED TO A SMOOTH SURFACE.
THERE WILL ALSO BE A SLIGHT COMPROMISE IN BLADE OPENING SMOOTHNESS FROM
THE TITANIUM PART RUBBING ON THE BLADE TANG AREA.
POSSIBLY LUBE OR POLISHING THE BLADE TANG CAN HELP.

BY PURCHASING THIS SET YOU ARE AWARE OF THE ABOVE MENTIONED AND THAT DAMAGE
OR THE POTENTIAL FOR MISSING PARTS COULD OCCUR AS A RESULT OF TAKING THE KNIFE.

YOU ALONE WILL BE TAKING FULL RESPONSIBLY FOR ANY SUCH DAMAGE OR LOSS.

(THE BENCHMADE WARRANTY MIGHT NOT COVER THESE TYPES OF MODS)

IF YOU ARE NOT CONFIDENT IN TAKING APART AND PUTTING YOUR KNIFE BACK TOGETHER
(OR IF ANYTHING ELSE GOES WRONG), IT IS BEST NOT TO BUY THIS SET.

Once you have received a colored titanium product. It may appear to have lost color once touched,
this is only just the oil from your hands. If the oil has been cleaned off the color will come back.
Use acetone to clean the oil off the anodized screws. (but do not get this on the carbon scales).
Dishwashing Liquid and Hot water also works. The custom anodizing will look new again!

Shipping Notes:

WORLDWIDE SHIPPING IS FREE !!!

If you are an international buyer, I may request your phone number and
confirmation that you understand only the parts are for sale.
No knives pictured or mentioned are for sale.

Please contact me if you have any questions or offers.
Offers may be accepted if the right conditions and price is reached.



Terms and Conditions for International Orders:

If you are in international buyer.
I may contact you before sending to confirm that only the screws are for sale.
If no reply has been made within 1 week, the sale will be canceled.
I will also cancel the order if the delivery address is unreadable or incomplete.

If your country’s main language is one other than English.
You will need to confirm that you understand, NO KNIVES ARE FOR SALE.

International orders are sent via Airmail and usually take around 2-3 weeks to arrive to you once sent.
However orders can take longer to arrive depending on your country’s air mailing delivery system.
Please do not buy if you cannot agree to this. All International items are sent via Airmail.

Sorry I have to keep repeating myself but there are many buyers especially from Non-English
speaking countries that assume the knife is also included.
I am just trying to make my listings as clear as possible that NO KNIVES ARE INCLUDED.

Sorry NO orders from Russia or surrounding countries will be accepted.
I just cannot read or write the language to be able to send out to you.
Orders from Italy must supply a phone number to add to the parcel and customs forms.

WORLDWIDE SHIPPING IS FREE !!!

Anodized Titanium Cleaning Tip:

To maintain the look of your new titanium parts.

Gently wipe clean with some Acetone but at the same time

be careful NOT to get Acetone on any Carbon or G10 knife scales.

Windex (safer) also works too but Acetone is stronger.

Dishwashing liquid and hot water also works.


PLEASE NOTE: These custom parts may need up to 2 weeks lead time to process after ordering.